공과대학
김홍건 명예교수
-
전공
-
-
홈페이지
-
전화번호
-
소속
공과대학 기계자동차공학과
-
연구실
공학2관 515호
학력
미국 매사추세츠대(University of Massachusetts)기계공학 박사(1992) 한양대학교 기계공학 석사(1984) 한양대학교 기계공학 학사(1979) 경기고등학교(1974)
전주대학교 경력
공학기술종합연구소 소장 기술수요조사단 위원장 새만금연구개발 추진위원회 위원 신재생에너지 추진위원회 위원장 지역혁신지원단 군산시 단장 NURI/e-Rest 사업단 단장 중앙도서관장 공학부장 산학연지원본부장 공학기술종합연구소 소장 공과대학 기계자동차공학과 교수
교육 및 연구경력
(1994년 ~ 2021년) 전주대학교 공과대학 기계자동차공학과 교수 (2010년 ~ 2021년) 탄소연구소 소장 (2018년 ~ 2019년) 한국기계가공학회 부회장 (2014년 ~ 2016년) 한국연구재단 공학단 전문위원 (2006년 ~ 2007년) 미국 University of California, Berkeley 교환교수 (1992년 ~ 1993년) 미국 Pennsylvania State University 박사후 연구원 (1985년 ~ 1990년) 한국원자력안전기술원 선임연구원 (1979년 ~ 1986년) 국방과학연구소
외부 기타활동
(사)한국신재생에너지학회 이사(2009.1 ~ 현재) 전라북도 대학지원사업성과분석위원회 총괄위원장(2008.4 ~ 2008.6) (사)대한기계학회 호남지부 부지회장(2008.1 ~ 현재) (사)한국공작기계학회 편집이사(2006.1 ~ 현재) 한국과학기술정보연구원 자문위원(2004.5 ~ 현재) (사)한국공작기계학회 재무이사(2004.1 ~ 2005.12) (사)대한기계학회 평의원(2004.1 ~ 2006.12) (사)한국자동차공학회 호남지부 편집이사(2005.1 ~ 현재) 전라북도과학기술정책자문단 메카트로닉스분과장(2002.1 ~ 2004.12) (사)한국생산제조시스템학회 이사(2011.1 ~ 현재) 한국생산제조학회 부회장(2012.1. ~2016.12) 전주대학교 산학협력단장(2013.2. ~ 2015.2.) 한국연구재단 공학단 전문위원(2014.9. ~ 2016.8.) 전북 출연기관 경영평가단(2015.10. ~ 현재) 한국기계가공학회 부회장(2018.1 ~ 2019.12)
연구 관심분야
탄소복합재료 / 신재생에너지 / 연료전지
강의분야
기계설계 / 차량구조 및 전장 / 재료강도학
저서 및 주요논문 외 기타
<저서 및 단행본> 김홍건, 나석찬, 신재생에너지와 연료전지, 학술정보, 2006. 김홍건, 기계설계, 문운당, 2010., 2019. <주요논문 및 학회지> H. G. KIM (등저), Effects of Flow Characteristics in Polymer Electrolyte Membrane Fuel Cell,『Materials Science Forum』Vol.620, 2009, pp.77-80 H. G. KIM (등저), Effects of Fiber Aspect Ratio Evaluated by Elastic Analysis in Discontinuous Composites,『Journal of Mechanical Science and Technology』Vol.22, 2008, pp.411-419 H. G. KIM (등저), Investigation of gas flow characteristics in proton exchange membrane fuel cell,『Journal of Mechanical Science and Technology』Vol.22, 2008, pp.1561-1567 H. G. KIM (등저), Evaluation of elastic modulus for unidirectionally aligned short fiber composites, Journal of Mechanical Science and Technology』Vol.23, 2008, pp.56-65 H. G. KIM (등저), Simulation of Unit Cell Performance in the Polymer Electrolyte Membrane Fuel Cell,『International Journal of Plasticity』Vol.7 No.7, 2006, pp.867-872 H. G. KIM (등저), Experimental Study on the Effects of the Performance of Polymer Electrolyte Membrane Fuel Cell,『Materials Science Forum』Vol.544 No.1, 2007, pp.993-996 H. G. KIM (등저), The Production and Performance Estimation of Dunnage for Transportation of a Steel Roll Coil,『Key Engineering Materials』Vol.340, 2006, pp.1363-1368 <수상경력> 한국생산제조시스템학회 우수논문발표상 2014 중소기업기술혁신대전 산학협력단장 유공표창/2013 전북환경대청상 (한국농어촌공사 사장 표창)/2014 한국기계가공학회 최우수논문발표상/2017-2019 전주대학교 총장표창 우수교수상 (우수연구업적상)/2019 중소기업 인력양성 중소벤처기업부장관상/2020 Direct growth of flower like-structured CuFe oxide on graphene supported nickel foam as an effective sensor for glucose determination, Vol 118, pp 1-9, 2020.10 The Effect of the Processing Parameters on the Properties of the Liquid Phase Spark Plasma Sintered 80Fe-20(Al + MWCNT) Magnetic Metal Matrix Nanocomposites, Vol 9, pp 1-9, 2020. 07 Magnetic, Electrical, and Mechanical Behavior of Fe-Al-MWCNT and Fe-Co-Al-MWCNT Magnetic Hybrid Nanocomposites Fabricated by Spark Plasma Sintering, Vol 3, pp 1-9, 2020. 02 Correlation between Drop Impact Energy and Residual Compressive Strength According to the Lamination of CFRP with EVA Sheets, Vol 1, pp 1-8, 2020.01 Electron Beam Irradiation Isolates Cellulose Nanofiber from Korea “Tall Goldenrod” Invasive Alien Plant Pulp, Vol 10, pp 1-9, 2019. 10 Use of a rough GaP layer to improve light efficiency of 860-nm GaAs-based vertical-cavity surface-emitting laser, Vol 211, pp 292-297, 2019. 07 Latent heat storage and thermal efficacy of carboxymethyl cellulose carbon foams containing Ag, Al, carbon nanotubes, and graphene in a phase change material, Vol 28, pp 1-9, 2019.01 Free-standing Three Dimensional Graphene Incorporated with Gold Nanoparticles as Novel Binder-free Electrochemical Sensor for Enhanced Glucose Detection, Vol 9, pp 229-237, 2018.05 N-doped graphene-carbon nanotube hybrid networks attaching with gold nanoparticles for glucose non-enzymatic sensor, Vol 90, pp 38-45, 2018. 10 Synthesis of Carbon Foam from Waste Artificial Marble Powder and Carboxymethyl Cellulose via Electron Beam Irradiation and Its Characterization, Vol 11, 2018. 04 The evaluation of electromagnetic shielding properties of CFRP/metal mesh hybrid woven laminated composites, Vol 52, 2018. 05 Investigation of Mechanical and Electromagnetic Interference Shielding Properties of Nickel-CFRP Textile Composites, Vol 27, 2018. 05